HUBS

 Front Hub

Rear hub

Cassettes

XRP/Vuelta Front Hub

The supply of quality non disk hubs at affordable prices is fast disappearing. We are now bringing to you high quality hubs at almost Deore prices. Made by Joytech (one of Taiwan's biggest hub maker) and branded under XRP/Vuelta Logo. It has super smooth cartridge bearings and machined end caps - features you find in hubs double its price. Black shell with silver end caps (see picture in right). Quick release. 100mm width. Available in both 32 and 36 holes.

FRHUBXRP36 ---$21.95 (36 hole)

FRHUBXRP32 ---$21.95 (32 hole)


SHIMANO® Deore Front Hub

100mm width. 36 or 32 hole. Quick release skewers. Oversize alloy hub body and heavy duty spoke flanges for durability. NOW IN BLACK !

FRHUBDEORE36 ---$19.95 (36 hole)


FRHUBDEORE32 ---$19.95 (32 hole)

 

XRP/Vuelta Rear Hub

Same super smooth cartridge bearings as in the front hub. 135mm width. 8/9 speed freehub. Black shell with silver end caps (see picture in right). Quick release. Available in both 32 and 36 holes. No need to pay for outrageous Shimano prices !

RRHUBXRP36 ---$34.95 (36 hole)

RRHUBXRP32 ---$34.95 (32 hole)


DISK Hubs Now Available. See Disk Section

Need a cassette cracker and chain whip to remove your cassette ?? See our tool section.

  SRAM 7.0 Cassette for 9 speed systems. All alloy for some weight savings. Use with 9 speed chains only. The 11/32 cogs have 11-12-14-16-18-21-24-28-32 teeth. The 11/34 cogs have 11-12-14-16-18-21-24-28-34 teeth.

CST91132---$34.95 (11-32 teeth, 9 speed)

CST91134V7---$34.95 (11-34 teeth, 9 speed series 7.0 all aluminum)

CST91134V5---$26.95 (11-34 teeth, 9 speed, series 5.0 steel cogs)


SRAM 5.0 Cassette for 8 speed systems. Steel cogs for durability. Use with 7/8 speed chains only. The 11/32 cogs have 11-12-14-16-18-21-26-32 teeth. The 11/34 cogs have 11-12-14-16-18-21-24-28-34 teeth.

CST81132---$26.95 (11-32 teeth, 8 speed)


SHIMANO® Nexave/Alivio 8 Speed Cassette. 11, 13, 15, 17, 20, 23, 26, 34T. Requires the Nexave or Sachs Centera rear derailleur .

CSTNEXAVE ---$29.95  

SHIMANO® Ultegra Front Hub

100mm width. choice of 36, 32 or 28 holes. Quick release skewers. Allloy hub body with ultra smooth precision bearings.

FRHUBULTEG36 ---$59.95 (36 hole)

FRHUBULTEG32 ---$59.95 (32 hole)

FRHUBULTEG28 ---$59.95 (28 hole)


Also avaibale in 32 hole Shimano 105 model

FRHUB10532 ---$39.95 (232hole)

SHIMANO® Deore Rear Freehub 8/9 speed. 8/9speed Cassette system. 135mm width. Quick release skewers. NOW IN BLACK !. Choice of 36 or 32 hole

RRHUBDEORE836 ---$34.95 (36 hole / 8 and 9speed)

RRHUBDEORE832 ---$34.95 (32 hole / 8 and 9speed)


You can use a 7 speed cassette on the 8 speed freehubs by using a 4.5mm spacer (see right).


SHIMANO® SORA Rear Freehub (road type)

8 and 9 speed Cassette system. Slightly narrower than the above mountain type hubs at 130mm width. 36 hole. Quick release skewers.

RRHUBRSX---$34.95 (36 hole, 8 and 9 speed)

You can use a 7 speed cassette on the 8/9 speed freehubs by using a 4.5mm spacer.

SHIMANO® 7 SPEED CASSETTES. 11-24 & 11-34 (Megarange) teeth. 7 speed. Black Cogs.

CST1124---(11-24 teeth, 7 speed HG50 or 30)


CST1134 --- (11-34 teeth, 7 speed HG50 or 30) Availability of wide range 7 spd cassettes is now very limited. Email us for your 7 speed cassette needs and we can check what is available.
4.5MM CASSETTE SPACER

Alloy spacer allows for the use of a 7 speed cassette on an 8 speed wide rear freehub.

SPACERHUB4.5 ---$3.95


1 MM CASSETTE SPACER

.SPACERHUB1mm ---$1.95

 

SACHS VT5000 Front Drum Brakes - 36 hole alloy front drum brakes. Used by Greenspeed recumbent trike builders for their front 2 wheels.

FRHUBVT5000---$69.95


Anchor Bolts for VT5000 Drum Hubs - Replacement anchor hardware for the above hub.

VT5BOLTS---$6.95

 SACHS 3x8 or 9 Dual Drive Internal Hub with disk - 24 or 27 speed system with a single front chainring by using a 3 speed internal hub with an 8 or 9 speed speed cassette system. No front derailleur or triple ring required. Alloy hub shell. 36 holes. 135mm width. 3 speed internal ratios - 27% down, 1:1 ratio, 36% up. Requires left Dual Drive shifter (see Below).

RRHUB3x8DISK--- $214.95

RRHUB3x8--- $204.95 (non disk version, 36 hole)

SOLEUS Front Quick Release Skewer - Avoid the hassles of removing your front wheel off a suspension fork or forks with safety tabs. This front skewer has an exaggerated cam release allowing removal without loosening your skewer lock nut. Adjust it once and wheel removal is a matter of loosening lever and pressing a thumb nut.

SOLQR---$8.95


DIMENSION Tandem Rear Hub Quick Release Skewer - Rear quick release for the wider tandem rear hubs. Fits 145mm hubs.

WQRLONG--$29.95


CYCLERITE Wheel Alloy Quick Release Skewer Set - Ultra Light alloy cam levers. Cromoly Skewers with nylon threadlock end caps. 100mm wide front skewers/135mm rear.

WHEELQRSET---$12.95

SUN Wheelchair Hub

Alloy wheelchair hub. 36 hole. Cartridge bearings for 1/2" axle. Bearings one one side flush with flange, recessed on the other side. Axle not included.

HUBWHLCHR ---$28.95


QUANDO 20mm Front Disk Hub. Need a front disk hub with a bigger 20mm axle diameter ?Sealed cartridge bearings. 20mm bearing inside diameter. 36 & 32 hole. 6 bolt disk mount pattern.

FRHUB20DIA32 ---$44.95 (32hole)

FRHUB20DIA36 ---$44.95 (36hole)


Quick Release 20mm Axle. Hollow 20mm axle for the 20mm front disk hub like the one on the left. Spring loaded end caps with quick release.

AXL20MMQR ---$28.95

SACHS 3x8 or 9 Dual Drive Drivetrain Parts - We now carry the left shifter to control the 3 speed internal mechanism of the dualdrive hub. If you have a matching right shifter, rear derailleur and cassette, you only have to buy the left shifter and clikbox to complete the system..

SHIFTDDRV3LEFT-- $24.95 (left shifter 3spd internal)


Integrated dual drive shifters - grip shifters to control the external 9 spd cassette and the thumb shifters to control the 3 speed internal mechanism of the dual drive hub.

SHIFTDDRV9-- $44.95


If you do not have the right side shifter and derailleur, you can use the parts below

RRDERDUALDRV-- $29.95 (ESP rear derailleur for both 8 & 9 spd)


SRAM9X7RIGHT-- $26.95 (9 speed right side shifter, SRAM X7.0)


CST91134---$34.95 (11-34 teeth, 9 speed SRAM 7.0 cassette)

SACHS Dual Drive Clickbox - Replacement clickbox when you accidentally drop your bike on the drive side damaging the control box as it enters the dual drive hub.

CLIKBOX-- $12.95

 

Shift Rod $3.95 ......This is the rod that actuates the internal mechanism of the Dual Drive hubs. For the newer 3 x8 or 9 Dualdrive. By a spare just in case you bend it.

.

SUMMIT Single Speed Front and Rear Hub - Summit is a house brand by a very big bicycle distributor. Hub features an alloy shell, cromoly axle with cartridge bearings for a smooth spin. Allen bolt nuts secures the hub to your dropouts. Axles are hollow allowing use of quick release as well. 32 hole. Front is a standard 100mm width, rear is 135mm.

FRHUBSINGLE-- $34.95 (front)

RRHUBSINGLE-- $39.95 (rear)

SHIMANO NEXUS Inter 7 Rear Hub. Seven speed internal gear hub. Gear shifting is independent of pedaling. You can pedal while standing still, pedaling or coasting. Gear ratios - 0.63,0.74, 0.84, .99, 1.15, 1.34, 1.55. With the included 21T cog, the equivalanet 7 spd cogs - 32t, 27t, 24t, 20t, 17t, 15t, 13t. Comes in 2 versions - one with roller brakes (as shown above) and another with coaster brakes. Includes 7 speed revo shifter. 36 hole.

NEXUS7ROL ---$189.95 (roller brake)

NEXUS7COAST ---$184.95 (coaster brake)


SHIMANO REVO 7 speed shifter - shifter for the Nexus 7 Inter Hub

NEXUS7SHIFT ---$19.95 (for coaster & roller brake)


SHIMANO Cog for Internal Geared hubs - Need to change the gearing on your Internal geared hubs ? Choice of 16 teeth, 18, 20 or 22 teeth. Cog slightly flares so you can flip flop for better chain alignment. Works with Shimano and Sturmey Archer internally geared hubs.

CSTXT ---$7.95 (specify number of teeth)

CROMOLY Quick Release axle - Need to convert solid axles into quick release ? We now carry hollow cromoly axles for both front and back. Front is 9mm in diameter, 108mm long for the standard 10mm wide hubs. Rear is 10mm in diameter, 146mm long for the 135mm wide rear hubs.

AXLCRFRONT-- $6.95 (front)

AXLCRREAR-- $7.95 (rear)


Banjo Type Axle Holder. This simple gizmo prevents axle hubs on horizontal dropouts from slipping. The banjo loop goes into the axle and the U channel secures to the back of the horizontal dropout. Requires 2 per wheel.

AXLTENSION ---$2.95 each

Return to Bike Parts Store